DCOM Volume I
From Ministry of Water DCOM Manual
Volume I: Design of Water Supply Projects
Readmore...or Download Volume I PDF
TABLE OF CONTENTS
Header text | Header text | Header text |
---|---|---|
Example | CHAPTER ONE: INTRODUCTION | Example |
Example | CHAPTER ONE: INTRODUCTION | Example |
Example | CHAPTER ONE: INTRODUCTION | Example |
Example | CHAPTER ONE: INTRODUCTION | Example |
Example | CHAPTER ONE: INTRODUCTION | Example |
Example | CHAPTER ONE: INTRODUCTION | Example |
Example | CHAPTER ONE: INTRODUCTION | Example |
Example | CHAPTER ONE: INTRODUCTION | Example |
Example | CHAPTER ONE: INTRODUCTION | Example |
Example | CHAPTER ONE: INTRODUCTION | Example |
Example | CHAPTER ONE: INTRODUCTION | Example |
Example | CHAPTER ONE: INTRODUCTION | Example |
Example | CHAPTER ONE: INTRODUCTION | Example |
Example | APENDICES: APPENDICES | Example |
Chapter # | Chapter Title | Page |
---|---|---|
i | LIST OF SPECIAL COMMITTEE MEMBERS | V |
1 | CHAPTER ONE: INTRODUCTION | 1 |
1.1 | Global Considerations on Water Supply and Sanitation | 1 |
1.1.1 | Global Considerations on Water Supply and Sanitation | 1 |
1.1.2 | Climate Change and Resilience to Climate Change | 2 |
1.1.3 | Public-Private Partnership in Water Supply and Sanitation Projects in Developing Countries | 3 |
1.1.4 | International Water Law | 4 |
1.2 | Development Agenda and Water and Sanitation Sector in Tanzania | 5 |
1.2.1 | National Water Policy | 7 |
1.2.2 | Legal and Institutional Framework for Water Supply and Sanitation Services | 8 |
1.2.3 | Coverage and Access to Water Supply Services | 9 |
1.2.4 | Policy Environment for Water and Sanitation Services in Tanzania | 9 |
1.2.5 | Major Stakeholders in Water Supply and Sanitation Projects | 10 |
1.2.6 | Water Supply and Sanitation Public Private Partnership in Tanzania | 11 |
1.3 | Rationale for Preparation of the Fourth Edition DCOM Manual | 13 |
1.4 | About the Fourth Edition of the DCOM Manual | 13 |
1.5 | Organisation of the 4th edition of the DCOM Manual | 14 |
1.6 | Purpose of this Volume | 14 |
1.7 | References | 15 |
Example | Example | Example |
Example | Example | Example |
Example | Example | Example |
Example | Example | Example |
- CHAPTER TWO 17
- PROJECT PLANNING 17
- 2.1 Planning Considerations for Water Supply Projects 17
- 2.2 Project Planning Steps 18
- 2.3 Pump Protection 18
- 2.3.1 Initiation 18
- 2.3.1.1 Community Assessment Steps 20
- 2.3.1.2 Methods of conducting community assessment 20
- 2.3.1.2.1 Comprehensive community assessment 20
- 2.3.1.2.2 Strategic community assessment 20
- 2.3.2 Pre-feasibility Study 21
- 2.3.3 Feasibility Study 21
- 2.3.3.1 Water Supply Projects Ranking and Technology Selection Criteria 22
- 2.3.3.1.1 Ranking of Projects 22
- 2.3.3.1.2 Choice of Technology 23
- 2.3.4 Preliminary and Detailed Design 23
- 2.3.4.1 Detailed Engineering Drawings 24
- 2.3.4.2 Detailed estimates of capital costs 24
- 2.3.4.3 Detailed estimates of recurrent costs 24
- 2.3.4.4 Anticipated revenue 25
- 2.3.4.5 Detailed design report 25
- 2.3.4.6 Project write-up to be submitted to potential financiers 25
- 2.3.5 Project Phasing 25
- 2.3.6 Procurement 26
- 2.3.6.1 2.2.6.1 Preparation of Tender Documents 26
- 2.3.6.2 Tendering process 27
- 2.3.7 Implementation/Construction Stage 27
- 2.3.7.1 Contract Management 27
- 2.3.7.2 Contract supervision and administration 27
- 2.3.8 Operation and Maintenance Stage 28
- 2.3.9 Performance Monitoring 28
- 2.4 Consulting the Integrated Water Resources Management and Development (IWRMD) Plans 28
- 2.4.1 Status of Development and Implementation of IWRMD Plans 29
- 2.4.2 Components of IWRMD Plans 30
- 2.5 Consult Guidelines for Preparation of Water Safety Plans - Resilient to Climate Change 30
- 2.6 Environmental and Social Impact Assessment Compliance 30
- 2.6.1 Procedures for Conducting ESIA in Tanzania 31
- 2.6.2 Strategic Environmental and Social Assessment (SESA) Compliance 31
- 2.7 Potential Impacts of Climate Change on Water Supply Projects 32
- 2.8 Participation of Community Based Water Supply Organizations (CBWSO) in Various Planning Stages 32
- 2.9 References 32
- CHAPTER THREE 35
- WATER SOURCES ANALYSIS 35
- 3.1 Availability of Water Resources in Tanzania Mainland 35
- 3.2 Water Sources Available in Tanzania Mainland 38
- 3.2.1 Rainwater and fog harvesting 39
- 3.2.2 Surface Water 39
- 3.2.2.1 Rivers or streams 39
- 3.2.2.2 Impoundments 39
- 3.2.2.3 Springs 39
- 3.2.2.4 Lakes 39
- 3.2.2.5 Dams 40
- 3.2.3 Groundwater 40
- 3.2.3.1 Infiltration galleries/wells 40
- 3.2.3.2 Well 40
- 3.2.3.3 Classification of wells based on the aquifer tapped 41
- 3.2.3.3.1 Shallow wells 41
- 3.2.3.3.2 Deep wells 41
- 3.2.3.3.3 Artesian wells 41
- 3.3 Quality Suitability of Water Sources for Water Supply Projects 42
- 3.4 Pilot Testing of Water Sources for Establishment of Appropriate Treatment 42
- 3.5 General Considerations for Selection of Water Sources 42
- 3.5.1 Adequacy and reliability 42
- 3.5.2 Quality of water sources 43
- 3.5.3 Technical Requirements 43
- 3.5.4 Cost implications to develop a water source 43
- 3.5.5 Protection of water sources 43
- 3.5.6 Legal and management requirements 44
- 3.5.7 Distance of water supply source 44
- 3.5.8 Topography of the project area and its surroundings 44
- 3.5.9 Elevation of a source of water supply 44
- 3.6 Determination of water source yield 44
- 3.6.1 Rainwater and fog harvesting 45
- 3.6.1.1 Rainwater harvesting 45
- 3.6.1.1.1 Types of rainwater harvesting 45
- 3.6.1.1.2 Components of rainwater harvesting system 46
- 3.6.1.1.3 Estimation of the yield 47
- 3.6.2 Hydrological Analysis of Surface Waters 47
- 3.7 Other considerations for various water sources 55
- 3.7.1 Water permits Considerations 55
- 3.7.2 Conservation of water sources 55
- 3.8 References 55
- CHAPTER FOUR 56
- WATER DEMAND ASSESSMENT 56
- 4.1 Water Demand Assessment 56
- 4.2 General Factors Affecting Water Demand Assessment 57
- 4.3 Determination of Water Demand for Different Uses 58
- Step 7. Establish Net Water Demand 67
- Step 9: Establish Operational water consumption 67
- Step 10: Establish System water losses 68
- Step 11 Establish Non-Revenue Water 69
- 4.4 Variations in Water Consumption 70
- 4.4.1 Definitions 70
- 4.4.2 Variation in the Rate of Consumption 71
- 4.4.2.1 Diurnal variation in demand 71
- 4.4.3 Peak Factors 72
- 4.4.4 Predicting Demand 74
- 4.4.5 Design Demand 75
- 4.5 References 75
- CHAPTER FIVE 76
- PIPELINES DESIGN 76
- 5.1 Design Requirements of pipelines 76
- 5.2 Types of pipelines 76
- 5.3 Security considerations for pipelines 76
- 5.3.1 Methods of water transmission and distribution 76
- 5.3.2 Gravity flow 77
- 5.3.3 Pumping with storage 77
- 5.3.4 Direct pumping to the distribution system 77
- 5.4 Pipeline Hydraulics Assessment 77
- 5.4.1 Pressure 77
- 5.4.2 Determination of Head Losses 77
- 5.5 Water supply transmission system 79
- 5.5.1 Determination of Transmission Pipe Size 79
- 5.5.2 Maximum Pressure 79
- 5.6 Distribution system 80
- 5.6.1 Branched System 80
- 5.6.2 Looped System 81
- 5.7 Pipe network analysis 82
- 5.7.1 Network analysis by Conventional method (Hardy Cross) 82
- 5.7.2 Network Analysis by Computer Software 82
- 5.7.2.1 EPANET Software 82
- 5.7.3 Pipeline design criteria 85
- 5.8 Pipeline materials selection 86
- 5.8.1 Considerations in Selecting Pipeline Materials 86
- 5.8.1.1 Flow Characteristics 86
- 5.8.1.2 Pipe Strength 86
- 5.8.1.3 Durability 87
- 5.8.1.4 Type of Soil 87
- 5.8.1.5 Availability 87
- 5.8.1.6 Cost of Pipes 87
- 5.8.2 Types of Pipe Materials Available 87
- 5.8.2.1 Galvanized Iron (GI) Pipes 87
- 5.8.2.2 Plastic Pipes 87
- 5.9 Appurtenances for transmission and distribution mains 88
- 5.9.1 Valves 89
- 5.9.1.1 Isolation Valves 89
- 5.9.1.2 Check Valves 89
- 5.9.1.3 Float Valves 89
- 5.9.1.4 Air Release Valves 89
- 5.9.1.5 Pressure Reducing Valves 89
- 5.9.1.6 Washout valves 89
- 5.9.2 Fittings 89
- 5.10 References 90
- CHAPTER SIX 91
- PUMPING SYSTEMS 91
- 6.1 Introduction 91
- 6.2 Rationale 91
- 6.3 Common Types of Pumps used in water supply 91
- 6.4 Pumping System Setup 91
- 6.5 Source of Pumping Power 92
- 6.6 Pumping system design pump selection 92
- 6.7 Pump Protection 95
- 6.8 References 95
- CHAPTER SEVEN 96
- WATER TREATMENT 96
- 7.1 Introduction 96
- 7.1.1 Classification of the qualities of water sources found in Tanzania according to the complexity of its treatment 96
- 7.1.2 Classification of Unit Operations to achieve water treatment levels 99
- 7.2 Recommended overall design approach for treatment plant components 99
- 7.3 Documents and websites consulted and those which are hyper-linked to the DCOM Manual 100
- 7.4 Water treatment design considerations 100
- 7.5 Water treatment levels and units 101
- 7.5.1 Pre-treatment 101
- 7.5.1.1 Scum and Floating Materials Skimmer 101
- 7.5.1.2 Screening or straining 101
- 7.5.1.3 Grit Removal 103
- 7.5.1.3.1 Design criteria 103
- 7.5.1.4 Sand Traps 105
- 7.5.1.5 Pre-chlorination 107
- 7.5.1.6 Water pre-conditioning (pH adjustment) 108
- 7.5.2 Primary Treatment 108
- 7.5.2.1 Sedimentation 108
- 7.5.2.2 Primary Filtration 114
- 7.5.2.2.1 Slow Sand Filtration 114
- 7.5.2.2.2 Rapid Gravity Sand Filtration 117
- 7.5.2.2.3 Comparison between Slow Sand Filters and Rapid Sand Filters 118
- 7.5.2.2.4 Other Types of Filters 119
- 7.5.2.3 Floatation 124
- 7.5.2.3.1 Dissolved-Air Floatation 124
- 7.5.2.3.2 Electrolytic Floatation 125
- 7.5.2.3.3 Dispersed-Air Floatation 125
- 7.5.2.4 Aeration 125
- 7.5.2.4.1 Falling Water Aerators 126
- 7.5.2.4.2 Spray Aerators 127
- 7.5.3 Secondary Treatment 130
- 7.5.3.1 Clarification 130
- 7.5.3.2 Coagulation 130
- 7.5.3.3 Flocculation 131
- 7.5.3.4 Filtration 131
- 7.5.4 Tertiary Treatment 132
- 7.5.4.1 Disinfection 132
- 7.5.4.1.1 Disinfection Methods 132
- 7.5.4.1.2 Chlorinators 132
- 7.5.4.1.3 Design considerations for chlorinators 133
- 7.5.4.2 Ozonation 133
- 7.5.4.3 Water softening 134
- 7.5.4.3.1 Methods of Softening 135
- 7.5.4.4 Defluoridation of Water 139
- 7.5.4.4.1 Fluorides 139
- 7.5.4.4.2 Defluoridation 139
- 7.5.4.5 Water Conditioning 141
- 7.5.5 Managemen